Kobra-KK102 I


• The K-array Kobra-KK102 I is a passive speaker system comprised of sixteen 2” neodymium magnet transducers housed in an elegant and sturdy stainless steel chassis. The vertical dispersion pattern can be switched for wide or narrow coverage, allowing for a great variety of applications. The sixteen closely spaced cone drivers provide true line array characteristics – phase coherence, low distortion and focused listening in both the near field, and at a distance from the speaker. A variety of rigging accessories provides many linking and hanging options for the KK102 I (1 meter) and the smaller (0.5 meter) KK52 I to be combined in vertical and horizontal line array configurations to satisfy many different venue requirements during temporary events and for permanent installations. For easier use and integration with other speakers or amplifiers, the KK102 I allows the user to select two different values of impedance (8Ω – 32Ω). At 32Ω as many as 4 KK102 I speakers can be powered off a single amplifier channel at Pure Array Technology (PAT) Composed of closely-spaced, full-range sound sources, our line array elements feature Pure Array Technology. With no crossover and no reflex, a perfect phase response is achieved in both the near and far fields, making these columns the perfect solution to cover long distances uniformly. The narrow vertical coverage minimizes the sound spill towards the ceiling and the floor, thus increasing the intelligibility in highly reverberant environments. FREQUENT APPLICATIONS CAFES, BISTROS & RESTAURANTS FITNESS & WELLNESS BROADCAST & STUDIOS THEATERS & CONCERT HALLS RETAIL STADIUMS & SPORT VENUES AUDITORIUMS, EDUCATION & GOVERNMENT FEATURES EVENT PRODUCTIONS Visually Discreete Lightweight & Compact Weather Resistent Selectable Impedence SUGGESTED ACCESSORIES K-FLY2 K-FOOT2 K-BASE2 K-WALL2 K-WALL2L K-JOINT2 Pure Array Technology (PAT) 8Ω (up to 8 elements at 4Ω). The KK102 I is able to reproduce the whole vocal frequency range with high intelligibility, starting from 150 Hz. Integrating one of K-array powered subwoofers (KMT12, KMT18, KMT21, KMT218), configured with specific presets for the KK102 I assures excellent coverage of the entire musical frequency range.

• The K-array KA amplifier series have presets optimized for KK102 I use.

• All KK102 I components are designed by the K-array R&D department and custom-made under the K-array quality control system.


Power handling 400 W (AES)
Impedance 8Ω or 32Ω (selectable)
Frequency range 150 Hz – 20 kHz (- 3dB) (1)
SPL 1W/1mt 98 dB (2)
Maximum SPL 124 dB continuous – 130 dB peak (3)
Horizontal 110°
Vertical 10°- 35° (selectable)
Type External Crossover required
Frequency High pass @150 Hz, 24 dB/oct suggested minimum
Full-range 16 x 2” Neodymium magnet with 0.75” voice coil
Impedance 8Ω – 32Ω
Coverage Spot – Flood
Connectors 2 x 4-pin Speakon
Wiring 1+ 1- (signal IN & LINK); 2+ 2- (through)
Type KA24, KA84, KMT
IP 54
Dimensions 5.9 x 100.0 x 8.1 cm (2.93“ x 39.37” x 3.18 “) (4)
Weight 4.8 Kg (10.6 lb)

Notes for data

1. With dedicated preset

2. Measured @8 m, then scaled @1 m;

3. Measured with musical signal

4. ( W x H x D). New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.