Kommander-KA14

FEATURES

•1000 W in just 2 rack units
•XLR and RCA Inputs
•4 independent, fully-configurable outputs
•Integrated DSP with processing
•Onboard touch screen for easy access functions
•Onboard K-array loudspeaker presets
•USB connectivity for remote control

DESCRIPTION

• The KA14 is a versatile amplifier, easily adaptable for small applications that do not require a lot of power. Responding to the needs for a simple solution for those who do not have a lot of additional resources, the KA14 is a complete system with a basic mixer, processor and amplifier.
• The KA14 features four fully-independent and configurable output channels (4 x 300 W at 4 Ω). The integrated DSP offers EQ, Matrix, Levels, Delays and a Limiter to avoid the need for additional external processors. The front panel has an easy-to-use touchscreen that gives access to all the basic functions for quick setup.
• The KA14 can be used as a mixer for fixed installations thanks to the XLR and RCA analog inputs. An onboard library with K-array speaker presets provides configuration for endless combinations of the Lyzard, Vyper, Tornado and Rumble loudspeakers. All DSP functions are remote controlled via the K-framework software over USB connector.
• The amplifier is built into a 2U lightweight, sturdy chassis and comes with a kit of removable rack adapters and four rubber pads for flat surfaces. KA amplifiers feature optical limiters, and protection against overheating, overcurrent and short circuits.

TECHNICAL SPECIFICATIONS

POWER OUTPUT
Max Power @ 4Ω 4 x 300 W (1)
Minimum Impendence 4 Ω
AUDIO SPECS
Distortion (THD+N) 0.005% Typical ( 1W @ 4Ω )
Bandwidth 20 Hz – 20kHz (±1 dB)
Input Impedence 47 kΩ
Dynamic Range 113 dB
Nominal Voltage Gain (f=1 kHz) 28.2 dB
PROTECTION
Thermal Yes
Short Circuit / Over Load Yes
Clip Limit / Analog Signal Limit Yes
AUDIO INPUT
Input Connectors 2 Female 3-Pin Balanced XLR + 3 Stereo female

Unbalanced RCA

Output Connectors Stereo Female Unbalanced RCA
REMOTE CONTROLO INPUT
Connectors 1 USB B Jack Serial Converter
AUDIO POWERED OUTPUT
Connectors 2×4 Pin Speakon NL4
NL4 1 Wiring 1+1-=A1 / 2+2- =A2
NL4 2 Wiring 1+1-=B1 / 2+2- =B2
AC POWER
Connector Powercon
Nominal Voltage 100 – 240V 50/60 Hz
Operating Range 85 – 264V
Efficiency >79% (typical)
1/8 Rated Power (Pink Noise)@ 8Ω 400 VA
CERTIFICATION
IP 20
PHYSICAL
Dimensions 430mmx295mmx94mm (17”x12”x4”)
Weight 3.8 kg (8.4 lbs)

1. EIAJ Test Standard, 1KHz, 1%THD
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.