POWER AMPLIFIERS

CHAMP-2

Convection cooled 2-channel power amplifier

Apart’s CHAMP-2 robust 2-channel power amplifier offers unequalled pure music quality with high power and a dynamic punch. Because this stereo amplifier is a part of the revolutionary CHAMP-series of convection cooled power amplifiers, the unit is maintenance free. The CHAMP-2 has no fan inside which implicates the amplifier works very silent and it stays dust-free at all times.

The built-in APC protection Technology allows you to preset the power potential of the amplifier. It constantly analyses incoming music signals and keeps the dynamics alive. An additional ultra fast peak limiter avoids that the amplifier starts to clip or get distorted.

CHAMP-2 has a unique self-supporting aluminium chassis and two strong detachable 19” brackets are included as well. This two-channel power amplifier is very affordable and reliable and will bring a loud music performance without sounding harsh.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 350 watts RMS output power 4 ohms 2 x 180 watts
dynamic output power 8 ohms 2 x 200 watts RMS output power 8 ohms 2 x 120 watts
dynamic output power bridged 8 ohms 750 watts output power RMS bridged 8 ohms 350 watts
dynamic output power 2.7 ohms 2 x 450 watts minimum impedance load per channel 2 ohms
minimum impedance load bridged per channel 4 ohms power consumption (max) 500 watts
19″ (483 mm wide) rack mounting yes height- rack units (1U=44 mm) 1 U
depth (build in) 338 mm depth (incl front) 356 mm
power supply 230 VAC output channels 2
line input balanced 2 line input unbalanced 2
frequency response (in Hz) 10 – 50 k cooling system convection
applicable low impedance yes Net weight product (kg) 7.50

CHAMP-3D

Convection cooled 3-channel digital power amplifier

The CHAMP-3D is a 3-channel fully programmable digital amplifier with all the essential features to meet your customer’s expectations. This versatile power center is ideal for medium to mid-sized applications up to 2100 watts and because of its convection cooling the amplifier has no fan inside so will stay dust-free.

The Hypex class-D amplifier modules inside a high damping factor is guaranteed which results in a real dynamic, warm and high-end sound. Without compromising on the advantages like low power consumption, high efficiency, low weight and a fanless design, Hypex has tackled all known disadvantages of digital amplification.

The built-in loudspeaker wizard of CHAMP-3D makes your life easy during set-up. This wizard offers you an easy way to select all Apart top cabinets and subwoofers which will now automatically be configured with the ideal DSP settings to protect your sound system and to guarantee a warm and dynamic high-end sound!

With the built-in high class DSP processor you have the possibility to adjust the 4-band full parametric EQ and crossover, delay, compressor and limiter-leveller. Once all your settings have been done, you can make multiple user permission levels to avoid tampering by unauthorized or unqualified people: another guarantee for a reliable and ideal sounding sound system.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 370 watts RMS output power 4 ohms 2 x 350 watts
dynamic output power 8 ohms 2 x 250 watts RMS output power 8 ohms 2 x 225 watts
dynamic output power 2.7 ohms 2 x 530 watts subwoofer output power RMS 2 ohms 1 x 1100 watts
subwoofer dynamic output power 2 ohms 1 x 1350 watts subwoofer minimum impedance load 2 ohms
minimum impedance load per channel 2.7 ohms power consumption (max) 1500 watts
19″ (483 mm wide) rack mounting yes height- rack units (1U=44 mm) 2 U
depth (build in) 345 mm depth (incl front) 378 mm
power supply 230 VAC output channels 3
line input balanced 2 tone control yes
RS232 (serial communication port) yes frequency response (in Hz) 10 – 24 k
cooling system convection applicable low impedance yes
Net weight product (kg) 16.10

CHAMP-4

Convection cooled 4-channel power amplifier

The CHAMP-4 versatile power amplifier is a part of the revolutionary CHAMP-series of convection cooled power amplifiers what makes this unit maintenance free. The CHAMP-4 has no fan inside which implicates the amplifier works very silent and it stays dust-free at all times.

The CHAMP-4 amplifier has 4 individual amplifier channels but can be bridged into 2 stereo channels or even a 2.1 sound system. Use two channels as subwoofer channels and drive your top loudspeakers with the two remaining channels and experience the pure musical power of CHAMP-4. It is just one of the ways in which you can use this quad amplifier.

The built-in APC Protection Technology allows you to preset the power potential of the amplifier. It constantly analyses incoming music signals and keeps the dynamics alive. An additional ultra fast peak limiter avoids that the amplifier starts to clip or get distorted.

SPECIFICATIONS

dynamic output power 4 ohms 4 x 125 watts RMS output power 4 ohms 4 x 80 watts
dynamic output power 8 ohms 4 x 75 watts RMS output power 8 ohms 4 x 60 watts
dynamic output power bridged 8 ohms 2 x 230 watts output power RMS bridged 8 ohms 2 x 130 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 400 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 1 U depth (build in) 337 mm
depth (incl front) 359 mm power supply 230 VAC
output channels 4 line input unbalanced 4
frequency response (in Hz) 20 – 40 k cooling system convection
applicable low impedance yes Net weight product (kg) 7.50

PA2240BP

2-channel bridgeable power amplifier, 2 x 240W @ 100 volt

The PA2240BP is a bridgeable and ultra-reliable 2-channel 100 volt power amplifier that can be used in all your big 100 volt projects. It can be configured as a 2-channel amplifier (2 x 240 watts) or it can be bridged into a 1 x 480 watts power amplifier if you need to power a big group of loudspeakers up to 480 watts.

Both channels have a program and priority input with independent bass and treble tone control that guarantees an excellent sound experience, even in tough acoustical conditions. The emergency priority input can be activated by contact closure to override the program or music input.

The PA2240BP operates on 230V AC and 24V DC, what makes him excel other power amplifiers. In this way the unit can easily be used in evacuation systems compliant to the EN60849 regulation. As all the controls of the PA2240BP are located at the back panel, changes of the amplifier’s settings by unauthorised or unqualified people will most likely be prevented.

As reliability is extremely important in the install and contractor audio market, this multifunctional PA2240BP will definitely be your favourite constant voltage power amplifier.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 240 watts RMS output power 4 ohms 2 x 240 watts
RMS output power 8 ohms 2 x 120 watts dynamic output power bridged 8 ohms 480 watts
output power RMS 100 volts 2 x 240 watts output power RMS bridged 100 volts 480 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 1050 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 2 U depth (build in) 411 mm
depth (incl front) 420 mm power supply 230 VAC
emergency power supply 24 VDC output voltage tappings 100 – 70 – 50 – 35 volts – 4 ohms
output channels 2 line input balanced 2
tone control yes priority input contact 2
emergency input yes priority output 24 VDC
priority levels 1 frequency response (in Hz) 35 – 22 k
cooling system fan applicable in 100V yes
applicable low impedance yes Net weight product (kg) 21.70

PA240P

1-channel power amplifier, 1 x 240W @ 100V

The PA240P is a fully equipped 240 watts constant voltage power amplifier that will meet all of your requirements. It is the device to built larger professional industrial sound applications. Besides high reliability and the basic functions of a power amplifier the PA240P excels above similar products by the inclusion of its extra technical features, possibilities and protection.

The unit is able to drive 4 ohms or constant voltage loudspeaker lines (50 – 70 – 100 volts). The amplifier has an input for background music (with link through) and a priority line input (for paging or evacuation messages), which can be activated by contact closure.

The bass – treble tone control guarantees an excellent sound experience, even in tough acoustical conditions. PA240P comes with a removable metal protection cover so that unauthorized people cannot change the amplifier’s volume, bass and treble tone controls on the front panel.

The volume of the program input can be set at the front and the volume of the priority input at the back of the amplifier. When the priority input has been activated, 24V DC outputs will be available to activate priority relays of loudspeaker attenuators or other devices.

SPECIFICATIONS

dynamic output power 4 ohms 240 watts RMS output power 4 ohms 240 watts
RMS output power 8 ohms 120 watts output power RMS 100 volts 240 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 525 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 2 U depth (build in) 343 mm
depth (incl front) 364 mm power supply 230 VAC
emergency power supply 24 VDC output voltage tappings 100 – 70 – 50 volts – 4 ohms
output channels 1 line input balanced 1
tone control yes priority input contact 1
emergency input yes priority output 24 VDC
priority levels 1 frequency response (in Hz) 35 – 22 k
cooling system fan applicable in 100V yes
applicable low impedance yes Net weight product (kg) 14.05

REVAMP1120T

1-channel 100V digital power amplifier, 1 x 120W

Our newest single channel professional power amplifier the REVAMP1120T is a unique and versatile Apart design with 1 x 120 watts output power @ 100 volts (or @ 4 ohms). The REVAMP1120T is a class-D amplifier with a builtin galvanic separated toroidal output transformer free of external influences and disturbances. Convection-cooled and excluded from cooling fans this amplifier is reliable, maintenance-free, silent and dust-free. The rear clip LED indication on the input gain together with the ease of installation via multiple input and link connection options make the REVAMP1120T the preferred installer’s choice. Completely built in a 1U chassis without front control the REVAMP1120T is bound to become a reference in the small and mid-sized fixed install audio market.

SPECIFICATIONS

dynamic output power 4 ohms 120 watts RMS output power 4 ohms 120 watts
dynamic output power 8 ohms 60 watts RMS output power 8 ohms 60 watts
output power RMS 100 volts 120 watts minimum impedance load per channel 4 ohms
power consumption (max) 200 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 1 U height 44 mm
depth (build in) 230 mm depth (incl front) 239 mm
power supply 115 – 230 VAC power supply technology switching mode power supply
output voltage tappings 100 – 70 – 50 – 35 volts – 4 ohms output channels 1
line input balanced 1 line input unbalanced 1
channel separation > 65 dB @ 1 kHz power amp topology class-D
frequency response (in Hz) 50 – 20 k cooling system convectional
applicable in 100V yes applicable low impedance yes
Net weight product (kg) 4.6

REVAMP1680

16-channel bridgeable digital power amplifier, 16 x 80W, 4oh

REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 100 watts output power @ 4 ohms, but the unit is also bridgeable to 8 x 200 watts @ 8 ohms. This 3 rack units high amplifier with very high channel separation also has a dual analog power supply with toroidal power transformers. The standby power consumption is very low, less than 0.5 watts!

Another smart feature of the REVAMP1680 is the switching mode standby power supply with multiple auto power on/off options. You can power on or power off the unit via a trigger input, audio sense… The trigger input is ideal when you want to switch on the power amplifier automatically using an external AC or DC trigger signal coming from your audio system. The amplifier will be switched on as long as the trigger voltage is present. Alternatively, you can set the power on mode switch to the audio trig position: the amp will automatically switch on when a sufficiently strong audio signal is present at the input and automatically switch off after a few minutes of silence.

This amplifier is equipped with 2 stereo bus inputs with pass through. These bus inputs are ideal when you want to hear the same audio signal in different output zones with the advantages you need less audio cables and the installation can be done very fast.

With its very low standby consumption and the fact the amplifier can easily be integrated in any audio project, the REVAMP1680 will soon become your favourite multi channel power amplifier.

SPECIFICATIONS

dynamic output power 4 ohms 16 x 100 watts RMS output power 4 ohms 16 x 80 watts
dynamic output power 8 ohms 16 x 60 watts RMS output power 8 ohms 16 x 40 watts
dynamic output power bridged 8 ohms 8 x 200 watts output power RMS bridged 8 ohms 8 x 160 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 1350 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 3 U depth (build in) 405 mm
depth (incl front) 421 mm power supply 115 – 230 VAC
power supply technology toroidal transformers output channels 16
line input unbalanced 20 channel separation > 68 dB @ 1 kHz
power amp topology class-D frequency response (in Hz) 20 – 30 k
cooling system convection applicable low impedance yes
Net weight product (kg) 21.70

REVAMP2060T

2-channel 100V bridgeable digital power amplifier, 2 x 60W

The new versatile REVAMP2060T is a professional 2-channel digital power amplifier with 2 x 60 watts output power @ 100 volts or @ 4 ohms, that can easily be bridged into a powerful 120 watts @ 100 volts or 8 ohms single amplifier. This Class-D amplifier has a galvanic separated toroidal output transformer built in to avert external influences & disturbances. A fast installation tool on the rear is the clip LED indicator that can be used during the configuration of the input gain. The convection cooled REVAMP2060T has no fan inside which implies that the amplifier works silent and stays dust-free at all times. This maintenance-free feature together with the ease of installation via multiple input and link connection options makes the REVAMP2060T the preferred installer’s choice. The slim 1U design without front control makes the REVAMP2060T a unique all-round amplifier unlike any other in the market.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 60 watts RMS output power 4 ohms 2 x 60 watts
dynamic output power 8 ohms 2 x 30 watts RMS output power 8 ohms 2 x 30 watts
dynamic output power bridged 8 ohms 120 watts output power RMS bridged 8 ohms 120 watts
output power RMS 100 volts 2 x 60 watts output power RMS bridged 100 volts 120 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 175 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 1 U depth (build in) 230 mm
depth (incl front) 239 mm power supply 115 – 230 VAC
power supply technology switching mode power supply output voltage tappings 100 – 70 – 50 – 35 volts – 4 ohms
output channels 2 line input balanced 2
line input unbalanced 2 channel separation > 65 db @ 1kHz
power amp topology class-D frequency response (in Hz) 50 – 20 k
cooling system convectional applicable in 100V yes
applicable low impedance yes Net weight product (kg) 5.7

REVAMP2120T

2-channel 100V bridgeable digital power amplifier, 2 x 120W

Immaculate sound performance, extremely reliable, maintenance-free this is how we would describe our latest REVAMP2120T. This 2-channel digital power amplifier provides 2 x 120 watts output power @ 100 volts or @ 4 ohms, that can easily be bridged into a powerful 240 watts @ 100 volts or 8 ohm single amplifier. The REVAMP2120T is a convection cooled class-D amplifier without built-in fans which implies that the amplifier is completely noiseless and dust-free at all times. The ergonomic and efficient 1U design has a galvanic separated toroidal output transformer built in to avert external influences & disturbances. During the configuration of the input gain the rear clip LED indicator can be used for a fast and easy installation. The multiple inputs and link connectors make the REVAMP2120T a versatile and installerfriendly amplifier superiour to any other in the fixed install market.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 120 watts RMS output power 4 ohms 2 x 120 watts
dynamic output power 8 ohms 2 x 60 watts RMS output power 8 ohms 2 x 60 watts
dynamic output power bridged 8 ohms 240 watts output power RMS bridged 8 ohms 240 watts
output power RMS 100 volts 2 x 120 watts output power RMS bridged 100 volts 240 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 300 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 1 U height 44 mm
depth (build in) 230 mm depth (incl front) 239 mm
power supply 115 – 230 VAC power supply technology switching mode power supply
output voltage tappings 100 -70 – 50 – 35 watts – 4 ohms output channels 2
line input balanced 2 line input unbalanced 2
channel separation > 65 dB @ 1 kHz power amp topology class-D
frequency response (in Hz) 50 – 20 k cooling system convectional
applicable in 100V yes applicable low impedance yes
Net weight product (kg) 6.1

REVAMP2150

Stereo Digital amplifier, convection cooled

The new all-purpose REVAMP2150 is a professional 2-channel digital power amplifier with 2 x 165 watts dynamic output power @ 4 ohms, that can easily be bridged into a powerful 330 watts @ 8 ohms single amplifier. This class-D amplifier is convection cooled without built-in fans which implies that the amplifier is completely noiseless and dust-free at all times. The unit has multiple speaker and amp protection circuits built inside for DC protect, over current protect, over temperature protect and protection against input overload. During the configuration of the input gain, the rear clip LED indicator is very useful and handy for a fast and easy installation. Versatile connectivity due to balanced and unbalanced inputs on euroblock or cinch, pass-through outputs on cinch and loudspeaker outputs on euroblock. Housed in a straightforward 1U slim and lightweight design without front control our REVAMP2150 is an amplifier unlike any other in the small and mid-sized fixed install audio market.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 165 watts RMS output power 4 ohms 2 x 150 watts
dynamic output power 8 ohms 2 x 95 watts RMS output power 8 ohms 2 x 80 watts
dynamic output power bridged 8 ohms 330 watts output power RMS bridged 8 ohms 300 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 400 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 1 U height 44 mm
depth (build in) 230 mm depth (incl front) 239 mm
power supply 115 – 230 VAC power supply technology switching mode power supply
output channels 2 line input balanced 2
line input unbalanced 2 channel separation > 70 dB @ 1 kHz
power amp topology class-D frequency response (in Hz) 20 – 22 k
cooling system convection applicable in 100V no
applicable low impedance yes Net weight product (kg) 5.1

REVAMP2250

2-channel bridgeable digital power amplifier, 2 x 250W, 4ohm

REVAMP2250 is a professional 2-channel digital power amplifier with 2 x 350 watts output power @ 4 ohms, but is also bridgeable (1 x 700 watts @ 8 ohms). The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (6 presets). An example of a preset is the combination CH1 subwoofer and CH2 trafo load.  In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output, allowing you to use 100 volt speakers as top speakers combined with a standard low impedance subwoofer. With the other presets channels can be bridged, high pass filters can be applied to a channel…

The very intuitive front display shows what is going on with one blink of an eye. Thanks to our own designed automatic protection system (patent pending) with smart use of a compressor/limiter topology we bring our switched mode power supply to an unexpected high level! This manifests itself in a great dynamic power with an unseen musicality and exceptional dynamic sound.

Ease of use, high-tech, reliability and big output power has never been as cleverly combined as in this REVAMP2250 amplifier.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 350 watts RMS output power 4 ohms 2 x 250 watts
dynamic output power 8 ohms 2 x 175 watts RMS output power 8 ohms 2 x 125 watts
dynamic output power bridged 8 ohms 700 watts output power RMS bridged 8 ohms 500 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 600 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 1 U depth (build in) 230 mm
depth (incl front) 239 mm power supply 115 – 230 VAC
power supply technology switching mode power supply output channels 2
line input balanced 2 line input unbalanced 2
channel separation > 74 dB @ 1 kHz power amp topology class-D
frequency response (in Hz) 10 – 24 k cooling system convection
applicable low impedance yes Net weight product (kg) 3.10

REVAMP2600

2-channel power amplifier, 2 x 600 watts @ 4 ohms

REVAMP2600 is a professional 2-channel power amplifier with 2 x 840 watts output power @ 4 ohms. The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (10 presets) what makes this amplifier the ideal multipurpose tool for applications where you need a lot of power in two different zones like fitness centres or stereo applications.

The amplifier contains an intelligent variable speed cooling fan. The REVAMP2600 also temporally decreases the output power to a safe limit whenever a thermal overload occurs (indicated by a LED light on the front panel). The very intuitive front display shows what is going on with one blink of an eye. Thanks to our own designed automatic protection system (patent pending) with smart use of a compressor/limiter topology we bring our power supply to an unexpected high level! This manifests itself in a great dynamic power with an unseen musicality and exceptional dynamic sound.

There are 9 presets available which can be selected by the button at the back of the unit. An example of a preset is the combination CH1 subwoofer and CH2 trafo load.  In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output, allowing you to use 100 volt speakers as top speakers combined with a standard low impedance subwoofer. With the other presets channels can be linked, high pass filters can be applied to a channel…

Ease of use, high-tech, reliability and big output power has never been as cleverly combined as in this REVAMP2600 amplifier.

SPECIFICATIONS

dynamic output power 4 ohms 2 x 840 watts RMS output power 4 ohms 2 x 600 watts
dynamic output power 8 ohms 2 x 420 watts RMS output power 8 ohms 2 x 300 watts
minimum impedance load per channel 4 ohms power consumption (max) 1840 watts
19″ (483 mm wide) rack mounting yes height- rack units (1U=44 mm) 2 U
depth (build in) 334 mm depth (incl front) 340 mm
power supply 230 VAC power supply technology toroidal transformer
output channels 2 line input balanced 2
line input unbalanced 2 channel separation > 67 dB @ 1 kHz
power amp topology class-H frequency response (in Hz) 10 – 24 k
cooling system fan applicable low impedance yes
Net weight product (kg) 12.10  

REVAMP4100

Quad Digital amplifier, convection cooled

REVAMP4100 is a professional digital 4-channel amplifier with high power Class-D power amplifier modules inside. The unit has extended speaker and amp protection circuits inside for DC protect, over current protect, over temperature protect and protection against input overload.

The REVAMP4100 amplifier has 4 individual amplifier channels but can be bridged into 2 stereo channels.

SPECIFICATIONS

dynamic output power 4 ohms 4 x 110 watts RMS output power 4 ohms 4 x 100 watts
dynamic output power 8 ohms 4 x 55 watts RMS output power 8 ohms 4 x 50 watts
dynamic output power bridged 8 ohms 2 x 225 watts output power RMS bridged 8 ohms 2 x 200 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 500 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 1 U height 44 mm
depth (build in) 230 mm depth (incl front) 239 mm
power supply 100 – 254 VAC power supply technology switching mode power supply
output channels 4 line input balanced 4
line input unbalanced 4 channel separation > 65 dB @ 1 kHz
power amp topology class-D frequency response (in Hz) 20 – 22 k
cooling system convection applicable in 100V no
applicable low impedance yes Net weight product (kg) 3.5

REVAMP4120T

4-channel 100V bridgeable digital power amplifier, 4 x 120W

REVAMP4120T is a professional 4-channel digital power amplifier with 4 x 120 watts output power @ 100 volt (or @ 4 ohms), but the unit is also bridgeable to 2 x 240 watts @ 100 volt (or @ 4 ohms). The unit incorporates a high efficient SMPS power supply, outputs with efficient Class D output topology and output transformers.

REVAMP4120T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.

In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 240 watts of output power!

The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound.

Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4120T amplifier.

SPECIFICATIONS

dynamic output power 4 ohms 4 x 120 watts RMS output power 4 ohms 4 x 120 watts
dynamic output power 8 ohms 4 x 60 watts RMS output power 8 ohms 4 x 60 watts
dynamic output power bridged 8 ohms 2 x 240 watts output power RMS bridged 8 ohms 2 x 240 watts
output power RMS 100 volts 4 x 120 watts output power RMS bridged 100 volts 2 x 240 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 525 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 2 U depth (build in) 330 mm
depth (incl front) 338 mm power supply 115 – 230 VAC
power supply technology switching mode power supply output voltage tappings 100 – 70 – 50 – 35 volts – 4 ohms
output channels 4 line input balanced 4
line input unbalanced 4 channel separation > 68 dB @ 1 kHz
power amp topology class-D frequency response (in Hz) 50 – 20 k
cooling system fan applicable in 100V yes
applicable low impedance yes Net weight product (kg) 12.10

REVAMP4240T

4-channel 100V bridgeable digital power amplifier, 4 x 240W

REVAMP4240T is a professional 4-channel digital power amplifier with 4 x 240 watt output power @ 100 volt, but the unit is also bridgeable to 2 x 480 watts @ 100 volt. The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

REVAMP4240T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.

In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 480 watts of output power!

The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound.

Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4240T amplifier.

SPECIFICATIONS

dynamic output power 4 ohms 4 x 240 watts RMS output power 4 ohms 4 x 240 watts
dynamic output power 8 ohms 4 x 120 watts RMS output power 8 ohms 4 x 120 watts
dynamic output power bridged 8 ohms 2 x 480 watts output power RMS bridged 8 ohms 2 x 480 watts
output power RMS 100 volts 4 x 240 watts output power RMS bridged 100 volts 2 x 480 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 1050 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 2 U depth (build in) 330 mm
depth (incl front) 338 mm power supply 115 – 230 VAC
power supply technology 2 x switching mode power supply output voltage tappings 100 – 70 – 50 – 35 volts – 4 ohms
output channels 4 line input balanced 4
line input unbalanced 4 channel separation > 68 dB @ 1 kHz
power amp topology class-D frequency response (in Hz) 50 – 20 k
cooling system fan applicable in 100V yes
applicable low impedance yes Net weight product (kg) 16.70

REVAMP8250

8-channel bridgeable class D power amplifier, 8 x 250W, 4ohm

This 8-channel bridgeable power amplifier is probably the most versatile class-D amplifier in the range. Combined with a pre-amplifier or matrix the REVAMP8250 can be used to create 8 zones in mono, 4 zones in stereo, even 4 bridged mono or 2 bridged stereo systems can be created. The amplifier has an intelligent variable speed cooling fan built-in to keep the unit cool at all times. When installing the REVAMP8250, a handy input overload LED indicator on the rear and amplifier clip indicator on the front will guarantee a fast and hassle-free installation. Due to the amount of channels, limited amplifiers are needed in your project. This will save money and space, making it the ideal choice for your install.

SPECIFICATIONS

dynamic output power 4 ohms 8 x 350 watts RMS output power 4 ohms 8 x 250 watts
dynamic output power 8 ohms 8 x 175 watts RMS output power 8 ohms 8 x 125 watts
dynamic output power bridged 8 ohms 4 x 650 watts output power RMS bridged 8 ohms 4 x 500 watts
minimum impedance load per channel 4 ohms minimum impedance load bridged per channel 8 ohms
power consumption (max) 2200 watts 19″ (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) 2 U height 88 mm
depth (build in) 330 mm depth (incl front) 338 mm
power supply 115 – 230 VAC power supply technology switching mode power supply
output channels 8 line input balanced 8
line input unbalanced 8 channel separation > 60 dB @ 1 kHz
power amp topology class-D applicable in 100V no
applicable low impedance yes Net weight product (kg) 21.7