Python-KP52 I


• The K-array Python-KP52 I is a passive speaker system comprised of six 3.15” neodymium magnet transducers housed in an elegant and sturdy stainless steel chassis. The vertical dispersion pattern can be switched for wide or narrow coverage, allowing for a great variety of applications. The six closely spaced cone drivers provide true line array characteristics-phase coherence, low distortion and focused listening in both the near field, and at a distance from the speaker. A variety of rigging accessories provides many linking and hanging options for the KP52 I (0.5 meter) and the larger (1 meter) KP102 I to be combined in vertical and horizontal line array configurations to satisfy many different venue requirements during temporary events and for permanent installations. For easier use and integration with other speakers or amplifiers, the KP52 I allows the user to select two different values of impedance (8Ω – 32Ω). At 32Ω as many as 4 KP52 I speakers can be powered off a single amplifier channel at 8 Ω (up to 8 units @ 4Ω), which eliminates the need of 70 V amplifiers for wider distributed installed systems. The KP52 I is able to reproduce the whole vocal frequency range with high intelligibility, starting from 100 Hz. Integrating one of the K-array powered subwoofers (KMT12, KMT18, KMT21), configured with specific presets for the KP52 I assures excellent coverage of the entire musical frequency range. The K-array KA amplifier series have pre-sets optimized for KP52 I.

• All KP52 I components are designed by the K-array R&D department and custom-made under the K-array quality control system.


Power handling 360 W (AES)
Max Power 600 W
Impedance kamagra oral jelly kaufen 8Ω or 32Ω (selectable)
Frequency range 100 Hz – 20 kHz (- 10dB) (1)
SPL 1W/1mt 96 dB (2)
Maximum SPL 122 dB continuous – 128 dB peak (3)
Horizontal 90°
Vertical 10°- 45° (selectable)
Type External Crossover required
Frequency 100 Hz, 24 dB/oct suggested minimum
Full-range 6 x 3.15” Neodymium magnet with 1” voice coil
Impedance 8Ω – 32Ω
Coverage Spot – Flood
Connectors 2 x 4-pin Speakon
Wiring 1+ 1- (signal IN & LINK); 2+ 2- (through)
Type KA24, KA84, KMT
IP 54
Dimensions 8.9 x 52.0 x 11.8 cm (3.50“ x 20.47” x 4.64 “) (4)
Weight 5.8 Kg (12.78 lb)

Notes for data

1. With dedicated preset

2. Measured @8 m, then scaled @1 m;

3. Measured with musical signal

4. ( W x H x D). New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.