Vyper-KV52

FEATURES

• Unique performance-to-size ratio
• Vertical, Horizontal and 3D line-array applications
• Multiple 1” long-excursion full-range cone  drivers
• Wide horizontal coverage
• Electronically protected
• Selectable 16 Ohm or 64 Ohm impedance
• Weather proof, suitable for outdoor installations- IP54

DESCRIPTION

• The KV52 Vyper is an ultra-flat passive speaker system comprised of eight 1” neodymium magnet transducers housed in an elegant yet sturdy luminum chassis.

• The eight closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker. A steel bracket accessory provides an option to mount wall application for permanent installations

• For easier use and integration with other speakers or amplifiers, the Vyper allows the user to select two different values of impedance (16Ω– 4Ω). At 64Ωas many  as 16 Vypers can be powered off a single amplifier channel at 4Ω, which eliminates the need of 70 V amplifiers for wider distributed installed systems.

• The Vyper is able to reproduce the whole vocal frequency range with high intelligibility, starting from 150 Hz. Integrating one of the K-array subwoofers KU family, powered by a KA amplifiers set with specific presets optimized for the Vyper assures excellent coverage of the entire musical frequency range.

• All Vyper components are designed by the K-array R&D department and are custom made under the K-array quality control system.

TECHNICAL SPECIFICATIONS

ACOUSTICS
Power handling 150 W (AES)
Impedance 16 Ω/ 64 Ω(selectable) viagra generika kaufen
Frequency range 150 Hz – 20 KHz (- 10dB) (1)
200 Hz – 18 kHz (- 3dB) (1)
SPL 1W/1mt 86 dB (2)
Maximum SPL 08 dB (cont.) – 114 dB (peak) (3)
COVERAGE
Horizontal 110°
Vertical 10°
CROSSOVER
Type External Crossover required
Frequency 150 Hz, 24 dB/oct uggested minimum
TRANSDUCERS
Full range 8 x 1” Neodymium magnet with 0.75” voice coil
SELECTION SWITCH
Impedance 16 Ω– 64 Ω
POWER AUDIO INPUT/OUTPUT
Connectorsl 2 x 2-pin Phoenix
RECOMMENDED AMPLIFIERS
Type KA14, KA24, KA84
CERTIFICATION
IP 54
PHYSICAL
Dimensions 3.95 x 50 x 2,15 cm (1.55” x 19.7” x 0.84”)
Weight 0.67 kg (1.48 lbs)

Notes for data

1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal New materials and design are introduced into existing products without previous notice. Present systems may  differ in some respects from those presented in this catalogue.