TRANSFORMERS

CONCEPT1T-KIT

Transform kit for Concept1
The CONCEPT1T-KIT allows you to convert a low impedance CONCEPT1 into a 100V amplifier. The kit contains 2 transformers and fixation screws.The circuit board of the unit has been pre-equipped to accommodate the transformers, so the conversion is a quick, hassle-free operation. Thanks to this conversion kit, CONCEPT1 is a very versatile amplifier that can be used in both low-impedance and 100 V situations. Apart products have been designed with installer’s ease in mind!

SPECIFICATIONS

supported main unit CONCEPT1 Net weight product (kg) 1,60

T20

8 ohms / 100 volt transformer, 20 watts
The Apart T20 is an 8 ohms to 100 volt transformer. By using the T20 you can change a standard 8 ohms loudspeaker into a 100 volt loudspeaker.The T20 has several power tappings from 2,5 up to 20 watts.

SPECIFICATIONS

height 44 mm width 70 mm
depth 34 mm 100V transformer power taps 20 – 10 – 5 – 2.5 watts
input 8 ohms output 100 volt
Net weight product (kg) 0,30

T20IP

waterproof 8 ohms / 100 volt transformer, 20 watts
The T20IP is a small built-in 100 volt line transformer, designed to make it possible to convert a standard 8 ohms loudspeaker into a 100 volt line speaker with selectable power taps (2.5 – 5 – 10 and 20 watts in 100 volt).This transformer will open a lot of additional speaker models to the 100 volt speaker range. The only thing that needs to be done is to connect the T20IP transformer between the 100 volt amplifier and the low impedance loudspeaker. Another great advantage of the T20IP is that it’s packed inside a humidity resistant box.The Apart waterproof marine speakers, the CMART Series, are already equipped with this 20 watts transformer what makes this waterproof series suited for low impedance as well as 100 volt systems.

SPECIFICATIONS

height 53 mm width 112 mm
depth 58 mm 100V transformer power taps 20 – 10 – 5 – 2.5 watts
input 8 ohms output 100 volt
Net weight product (kg) 0,53

T60

8 ohms / 100 volt transformer, 60 watts
The Apart T60 is an 8 ohms to 100 volt transformer. By using the T60 you can change a standard 8 ohms loudspeaker into a 100 volt loudspeaker.The T60 has several power tappings from 6 up to 60 watts.

SPECIFICATIONS

height 60 mm width 77 mm
depth 46 mm 100V transformer power taps 60 – 30 – 15 – 6 watts
input 8 ohms output 100 volt
Net weight product (kg) 0,60