MARINE SERIES

CMAR5

5″ two-way built-in marine speaker 8 ohms/50W

The CMAR5-W is a chlorine and salt water proof two-way 5.25″ loudspeaker. This marine speaker has been designed especially to offer superb sound and efficiency even in the most difficult, humid and hot conditions.

We have combined the best quality components with rigorous engineering specifications which results in a speaker that offers both durability and a great sound.

The fully plastic housing and stainless steel grille of the CMAR5-W loudspeaker are an absolute guarantee against rust and allow use in temperatures up to 95°C. Especially for use in yachts, cruise ships or sauna.

The CMAR Marine Series is available in 5.25″ (CMAR5-W), 6.5″ (CMAR6-W) and 8″ (CMAR8-W), so that there is always a speaker that exactly fits your needs!

SPECIFICATIONS

outside diameter 152 mm depth 55 mm
cutout 113 mm installation grip range 1 – up mm
loudspeaker system 2-way woofer size 5.25 inch
woofer cone material polypropylene tweeter size 1 – up inch
mounting system 4 screws impedance 8 ohms
low impedance dynamic power 50 watts low impedance RMS power 25 watts
SPL 1W/1m 88 dB max SPL 1m 100 dB
frequency response 85 – 20K Hz main construction material ABS plastic
grille main material stainless steel IP rating 65
applicable low impedance yes applicable in 100V no
Vertical dispersion angle 1000 Hz 180° closest RAL colour (subject to deviations) RAL9003
Net weight product 0.60 kg

CMAR5T

5″ two-way built-in marine speaker 8 ohms/50W; 100V/20W

The CMAR5T marine speaker will bring high quality sound, even in the most difficult humid places. In these humid environments the selection of speaker components is limited to just a few, mostly not the best in audiophile performance. However we achieved to solve the material challenge and are able to bring you a marine speaker that offers a superb sound.

The CMART Marine Series has 3 different models in 5” (CMAR5T-W), 6” (CMAR6T-W) and 8” (CMAR8T-W). These loudspeakers are especially developed to be installed in humid or hot (up to 95° C) environments like swimming pools, yachts, bathrooms, saunas …

This new Apart waterproof marine speaker is already equipped with a 20 watts transformer (T20iP) what makes this waterproof speaker suited for low impedance as well as 100 volt systems.

SPECIFICATIONS

outside diameter 152 mm depth 55 mm
cutout 113 mm installation grip range 1 – up mm
loudspeaker system 2-way woofer size 5.25 inch
woofer cone material polypropylene tweeter size 1 inch inch
mounting system 4 screws 100V transformer power taps 20 – 10 – 5 – 2.5 watts
impedance 8 ohms low impedance dynamic power 50 watts
low impedance RMS power 25 watts SPL 1W/1m 88 dB
max SPL 1m 100 dB frequency response 85 – 20K Hz
main construction material ABS plastic grille main material stainless steel
IP rating 65 applicable low impedance yes
applicable in 100V yes Vertical dispersion angle 1000 Hz 180°
closest RAL colour (subject to deviations) RAL9003 Net weight product 1.15 kg

CMAR6

6″ two-way built-in marine speaker 8 ohms/60W

The CMAR6-W is a chlorine and salt water proof two-way 6.5″ loudspeaker. This marine speaker has been designed especially to offer superb sound and efficiency even in the most difficult, humid and hot conditions.

The fully plastic housing and stainless steel grille of the CMAR6-W loudspeaker are an absolute guarantee against rust and allow use in temperatures up to 95°C. Especially for use in yachts, cruise ships or sauna’s.

We have combined the best quality components with rigorous engineering specifications which results in a speaker that offers both durability and a great sound.

The CMAR Marine Series is available in 5.25″ (CMAR5-W), 6.5″ (CMAR6-W) and 8″ (CMAR8-W), so that there is always a speaker that exactly fits your needs!

SPECIFICATIONS

outside diameter 190 mm depth 61 mm
cutout 151 mm installation grip range 1 – up mm
loudspeaker system 2-way woofer size 6.5 inch
woofer cone material polypropylene tweeter size 1 inch inch
mounting system 4 screws impedance 8 ohms
low impedance dynamic power 60 watts low impedance RMS power 30 watts
SPL 1W/1m 89 dB max SPL 1m 104 dB
frequency response 78 – 20K Hz main construction material ABS plastic
grille main material stainless steel IP rating 65
applicable low impedance yes applicable in 100V no
Vertical dispersion angle 1000 Hz 180° closest RAL colour (subject to deviations) RAL9003
Net weight product 1.00 kg

CMAR6T

6″ two-way built-in marine speaker 8 ohms/60W; 100V/20W

The CMAR6T marine speaker will bring high quality sound, even in the most difficult humid places. In these humid environments the selection of speaker components is limited to just a few, mostly not the best in audiophile performance. However we achieved to solve the material challenge and are able to bring you a marine speaker that offers a superb sound.

The CMART Marine Series has 3 different models in 5” (CMAR5T-W), 6” (CMAR6T-W) and 8” (CMAR8T-W). These loudspeakers are especially developed to be installed in humid or hot (up to 95° C) environments like swimming pools, yachts, bathrooms, saunas …

This new Apart waterproof marine speaker is already equipped with a 20 watts transformer (T20iP) what makes this waterproof speaker suited for low impedance as well as 100 volt systems.

SPECIFICATIONS

outside diameter 190 mm depth 61 mm
cutout 151 mm installation grip range 1 – up mm
loudspeaker system 2-way woofer size 6.5 inch
woofer cone material polypropylene tweeter size 1 inch inch
mounting system 4 screws 100V transformer power taps 20 – 10 – 5 – 2.5 watts
impedance 8 ohms low impedance dynamic power 60 watts
low impedance RMS power 30 watts SPL 1W/1m 89 dB
max SPL 1m 104 dB frequency response 78 – 20K Hz
main construction material ABS plastic grille main material stainless steel
IP rating 65 applicable low impedance yes
applicable in 100V yes Vertical dispersion angle 1000 Hz 180°
closest RAL colour (subject to deviations) RAL9003 Net weight product 1.47 kg

CMAR8

8″ two-way built-in marine speaker 8 ohms/100W

The CMAR8-W is a chlorine and salt water proof two-way 8″ loudspeaker. This marine speaker has been designed especially to offer superb sound and efficiency even in the most difficult, humid and hot conditions.

The fully plastic housing and stainless steel grille of the CMAR8-W loudspeaker are an absolute guarantee against rust and allow use in temperatures up to 95°C. Especially for use in yachts, cruise ships or sauna’s.

We have combined the best quality components with rigorous engineering specifications which results in a speaker that offers both durability and a great sound.

The CMAR Marine Series is available in 5.25″ (CMAR5-W), 6.5″ (CMAR6-W) and 8″ (CMAR8-W), so that there is always a speaker that exactly fits your needs!

SPECIFICATIONS

outside diameter 221 mm depth 76 mm
cutout 184 mm installation grip range 1 – up mm
loudspeaker system 2-way woofer size 8 inch
woofer cone material polypropylene tweeter size 1 inch
mounting system 4 screws impedance 8 ohms
low impedance dynamic power 100 watts low impedance RMS power 50 watts
SPL 1W/1m 88 dB max SPL 1m 107 dB
frequency response 55 – 20K Hz main construction material ABS plastic
grille main material stainless steel IP rating 65
applicable low impedance yes applicable in 100V no
Vertical dispersion angle 1000 Hz 180° closest RAL colour (subject to deviations) RAL9003
Net weight product 1.50 kg

CMAR8T

8″ two-way built-in marine speaker 8 ohms/100W; 100V/20W

The CMAR8T marine speaker will bring high quality sound, even in the most difficult humid places. In these humid environments the selection of speaker components is limited to just a few, mostly not the best in audiophile performance. However we achieved to solve the material challenge and are able to bring you a marine speaker that offers a superb sound.

The CMART Marine Series has 3 different models in 5” (CMAR5T-W), 6” (CMAR6T-W) and 8” (CMAR8T-W). These loudspeakers are especially developed to be installed in humid or hot (up to 95° C) environments like swimming pools, yachts, bathrooms, saunas …

This new Apart waterproof marine speaker is already equipped with a 20 watts transformer (T20iP) what makes this waterproof speaker suited for low impedance as well as 100 volt systems.

SPECIFICATIONS

outside diameter 221 mm depth 76 mm
cutout 184 mm installation grip range 1 – up mm
loudspeaker system 2-way woofer size 8 inch
woofer cone material polypropylene tweeter size 1 inch
mounting system 4 screws 100V transformer power taps 20 – 10 – 5 – 2.5 watts
impedance 8 ohms low impedance dynamic power 100 watts
low impedance RMS power 50 watts SPL 1W/1m 88 dB
max SPL 1m 107 dB frequency response 55 – 20K Hz
main construction material ABS plastic grille main material stainless steel
IP rating 65 applicable low impedance yes
applicable in 100V yes Vertical dispersion angle 1000 Hz 180°
closest RAL colour (subject to deviations) RAL9003 Net weight product 2.03 kg