SUB2201
 |
Compact passive 10″ subwoofer, black The Apart SUB2201 compact 10″ passive subwoofer is designed to reproduce a smooth and punchy bass on a small footprint, offering 250 watts music power @ 4 ohms. The 6th order bandpass cabinet produces a dry yet deep bass using only a single 10 inch long stroke woofer.Fill your bar, restaurant or shop with a full spectrum sound! The SUB2201 in combination with CHAMP-3D and MASK or OVO loudspeakers deliver a live sound experience which makes your trousers vibrate.SUB2201 is built in plywood and has a structured paint finishing. The combination of its compact size and powerful bass allow you to put the subwoofer under a bench, in a corner or build it into furniture while still enjoying the vibes of a fat, kicking bass! This subwoofer is equipped with a 35 mm metal pole mount adapter on top, allowing stands for placing top cabinets. |
SPECIFICATIONS
| height | 600 mm | width | 300 mm |
| depth | 380 mm | loudspeaker system | single |
| woofer size | 10 inch | woofer cone material | paper |
| impedance (ohms) | 4 | low impedance dynamic power | 250 watts |
| low impedance RMS power | 125 watts | SPL 1W/1m | 96 dB |
| max SPL 1m | 120 dB | frequency response | 45 – 150 Hz |
| main construction material | plywood | IP rating | 20 |
| closest RAL colour (subject to deviations) | RAL9011 | Net weight product (kg) | 18,50 |
SUB2400
 |
Powerful passive dual 10″ subwoofer, black The SUB2400 is a powerful passive dual 10” subwoofer that will deliver an incredible punchy bass that makes your trousers vibrate. Together with the MASK6 or MASK8 cabinet loudspeakers and the 3 channel digital amplifier (CHAMP-3D) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns… where often “dance level” music is required.This subwoofer has two band pass chambers where each chamber is equipped with a 10” dual coil woofer. Together with the push-pull technology this results in a relative small cabinet with a huge output and very low distortion. Thanks to the small size of the woofers, less mass has to be moved. The bass reproduction is a lot more “punchy” and “faster” compared to 15” or 18” cabinets. The SUB2400 has been compared with a single 15” and 18” subwoofers and the results were astonishing in favour of the SUB2400!SUB2400 can be driven in 4 ohms or 16 ohms mode. Selection is done by the big switch at the back of the subwoofer. Especially with long cable runs, the 16 ohms mode is advised. Less power is lost and the bass response will be a lot better. The 16 ohms mode also allows you to use multiple cabinets. |
SPECIFICATIONS
| height | 700 mm | width | 352 mm |
| depth | 450 mm | loudspeaker system | dual coil |
| woofer size | 2 x 10 inch | woofer cone material | paper |
| impedance (ohms) | 4 or 16 | low impedance dynamic power | 600 watts |
| low impedance RMS power | 300 watts | SPL 1W/1m | 99 dB |
| max SPL 1m | 133 dB | frequency response | 45 – 150 Hz |
| main construction material | plywood | IP rating | 20 |
| closest RAL colour (subject to deviations) | RAL9003 (W) / RAL9011 (BL) | Net weight product (kg) | 29,20 |
SUBA165
 |
Compact active 8″ subwoofer, black The SUBA165 is a compact active 8” subwoofer that gives you an amazing performance remarkable for its small size. It is the ideal solution (especially with the MASK or OVO loudspeakers) for that little extra bass in your meeting room, restaurant, showroom, board room or surround system in your living room.It completes your sound reproduction with an impressive and clear deep bass. The subwoofer has a Line input and a High-level input. At the back panel, the subwoofer is equipped with an adjustable X-over between 40-160 Hz, a volume control and a phase switch. The subwoofer is activated via the build in auto-power-on/off energy saving function. A “clip” indicator warns when maximum power is reached. The cabinet of SUBA165 is made of wood and has an 8” HD woofer. |
SPECIFICATIONS
| height | 356 mm | width | 260 mm |
| depth | 405 mm | power supply | 230 VAC |
| loudspeaker system | single | woofer size | 8 inch |
| woofer cone material | coated paper | impedance (ohms) | 4 |
| low impedance dynamic power | 140 watts | low impedance RMS power | 70 watts |
| SPL 1W/1m | 89 dB | max SPL 1m | 109 dB |
| frequency response | 30 – 180 Hz | main construction material | mdf wood |
| grille main material | cloth | IP rating | 20 |
| active | Yes | closest RAL colour (subject to deviations) | RAL9003 (W) / RAL9011 (BL) |
| Net weight product (kg) | 13,80 |
SUBLIME
 |
Ultra compact passive 6.5″ dual coil subwoofer, black The SUBLIME is an ultra compact passive 6.5″ dual coil subwoofer that offers the ultimate blend of a compact size and deep, fat basses. Thanks to the built-in X-over, this subwoofer is the ideal partner for the MASK2 top speakers. This thinnest subwoofer on the market (only 12 cm deep) allows for easy integration into any interior: on the wall (mounted with the included wall mounting brackets), behind curtains or even under furniture. Speaker and connection terminals are invisible when mounted on the wall using the included mounting brackets. It may look like a small heating radiator, but instead of heat, it will radiate musical vibes in your room. The SUBLIME subwoofer has a built-in stereo X-over filter, thus eliminating the need for external filters. The X-over filter separates the high frequencies and sends them directly to the top speakers. Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active filter and separate power amplifier. You can use the SUBLIME up to 200 Hz. |
SPECIFICATIONS
| height | 420 mm | width | 470 mm |
| depth | 120 mm | loudspeaker system | dual coil |
| woofer size | 6.5 inch | woofer cone material | coated paper |
| mounting system | wall bracket | impedance (ohms) | 8 |
| low impedance dynamic power | 2 x 80 watts | low impedance RMS power | 2 x 40 watts |
| SPL 1W/1m | 85 dB | max SPL 1m | 107 dB |
| frequency response | 50 – 200 Hz | main construction material | mdf wood |
| grille main material | cloth | IP rating | 20 |
| closest RAL colour (subject to deviations) | RAL9003 (W) / RAL9011 (BL) | Net weight product (kg) | 8,00 |
VINCI8S
 |
HiFi active 8″ subwoofer, black The Apart VINCI8S active subwoofer with high power amplifier is designed to reproduce a fat and deep bass at moderate sound pressure levels. Due to its discrete design and small dimensions, the subwoofer is very easy to integrate even in the most demanding environments. It is needless to say that VINCI8S is the perfect match for the Apart VINCI4 & VINCI5 bookshelf speakers or the VINCI7 prestigious cabinet loudspeakers. This combination is the ideal sound system for retail stores, shops, and restaurants or meeting rooms. Of course in residential applications VINCI8S is a great audio solution as the subwoofer is compatible with most home cinema systems and AV receivers. At the back of the subwoofer an adjustable crossover frequency and level control potentiometer is available for optimal blending of the VINCI8S with the main loudspeakers. You can also set the VINCI8S in energy mode what makes the subwoofer switch off to standby mode automatically after a few minutes without any signal present at the inputs. In standby mode the subwoofer has a power consumption of less than 0,5 watts! VINCI8S has a bass reflex speaker design with an 8” long throw woofer. The cabinet is made of MDF with a high gloss paint finish. Typical for all VINCI products, the VINCI8S also has a magnetic removable grill. Furthermore the VINCI8S is supplied with both rubber feet and spikes allowing perfect and optimized installation and sound quality. |
SPECIFICATIONS
| height | 345 mm | width | 262 mm |
| depth | 405 mm | power supply | 230 VAC |
| loudspeaker system | single | woofer size | 8 inch |
| woofer cone material | coated paper | mounting system | spikes |
| impedance (ohms) | 4 | low impedance dynamic power | 125 watts |
| low impedance RMS power | 60 watts | SPL 1W/1m | 89 dB |
| max SPL 1m | 109 dB | frequency response | 20 – 180 Hz |
| main construction material | wood | grille main material | cloth |
| IP rating | 20 | active | Yes |
| closest RAL colour (subject to deviations) | RAL9016 (W) / RAL9005 (BL) | Net weight product (kg) | 12,50 |
