PM1122-INT
 |
Digital RS232 interface for PM1122 The PM1122-INT is a digital interface remote for the 2-stereo zone remote controlled stereo pre-amplifier PM1122.There are 3 possible ways to control the interface remotely: by using RS-232, using contacts to recall presets and by using an RF wall controller in combination with a remote controlled RF-module that is plugged into the back of a PM1122-INT. It is possible to control the source (4 sources), the music level and the microphone level by remote control. The PM1122-INT controls only the pre-amplifier via a CAT5 cable, and can not be plugged into a LAN! |
SPECIFICATIONS
| supported main unit | PM1122 | Net weight product (kg) | 0,60 |
PM1122R
 |
Wall control panel for PM1122 The PM1122R is a very affordable remote control panel for the PM1122, Apart’s multifunctional pre-amplifier.The control panel offers music level control, line source selection and microphone mix level control. The remote panels are connected to the PM1122 by a standard CAT-5 cable wired according to the T-568B protocol. The maximum wire length is up to 300m, according to circumstances. You can use one PM1122RL per zone. Mounting screws are included. |
SPECIFICATIONS
| display | No | display backlight | No |
| supported main unit | PM1122 | programmable functions | No |
| addressing | Hardwired | connector type | RJ45 |
| max. cable length | 300 m | power type | Phantom |
| inputs | No | width | 115 mm |
| height | 80 mm | depth | 40 mm |
| weight | 165 gr | Net weight product (kg) | 0,25 |
PM1122RL
 |
Wall control panel with local input for PM1122 The PM1122RL is a very affordable remote control panel with local audio input (mini-jack and XLR) for the PM1122, Apart’s multifunctional pre-amplifier.The control panel offers music level control, line source selection and microphone mix level control. The PM1122RL also adds a double local source input, which means that there can be a microphone on the XLR and/or an MP3 player, or a pc or other line input on the stereo mini-jack connector. However, the local source input is always mono. There can be phantom power to the XLR connector by setting a jumper on the pack of the control panel. The remote panels are connected to the PM1122 by a standard CAT-5 cable wired according to the T-568B protocol. The maximum wire length is up to 300m, according to circumstances. You can use one PM1122RL per zone. Mounting screws are included. |
SPECIFICATIONS
| display | No | display backlight | No |
| supported main unit | PM1122 | programmable functions | No |
| addressing | Hardwired | connector type | RJ45 |
| max. cable length | 300 m | power type | Phantom |
| inputs | Bal. Mic. & Unbal. Line | width | 115 mm |
| height | 115 mm | depth | 40 mm |
| weight | 260 gr | Net weight product (kg) | 0,25 |
PM1122W
 |
Wireless remote control panel for PM1122WR, white The PM1122W is the wireless remote control for the PM1122, Apart’s multifunctional 2-stereo zone pre-amplifier. This ultra flat controller is only 15mm thin and truly wireless! Because it works on a lithium battery there is no power cable.Because of its ultra-flat design it can be placed everywhere. No breaking required! It’s very thin and you can stick it on a wall, a boardroom table, a lecturer’s desk, eg… It’s ideal for those situations where an installer cannot use fixed cabling like meeting rooms with movable walls, historic venues and the like. This wireless receiver comes with a Niko faceplate included. Through this remote control, it is possible to control the source selection, microphone volume and music volume control of a zone on a PM1122 pre-amplifier. |
SPECIFICATIONS
| display | No | display backlight | No |
| supported main unit | PM1122 | programmable functions | Yes |
| addressing | Software | connector type | Wireless |
| power type | Battery | inputs | No |
| width | 85 mm | height | 85 mm |
| depth | 15 mm | Net weight product (kg) | 0,10 |
PM1122WR
 |
Receiver module for PM1122-INT The PM1122WR is the plug-in receiver antenna that is designed exclusively for RF-extension of the PM1122INT. It connects this 2-zone digital remote interface with the PM1122W, the wireless remote control that allows control of the source selection, microphone volume and music volume of a PM1122 pre-amplifier. It is possible to link up to 32 wireless controls to one RF receiver module. This wireless receiver is designed to work exclusively with the wireless controllers (PM1122W) and digital remote interface (PM1122INT) of the PM1222, Apart’s 2-stereo zone, and remote controlled pre-amplifier. Both the wireless controllers and the receiver operate on the 863.3 Mhz band. |
SPECIFICATIONS
| supported main unit | PM1122 | Net weight product (kg) | 0,20 |
