FEATURES ANH APPLICATIONS
| Self-powered Integrated DSP and remote control Onboard touch screen with matrix control RS485 and USB connectivity for remote control Digital acoustic steering |
Small/medium scale events Touring sound reinforcement Clubs, stadiums, arenas, concert halls, theatres |
DESCRIPTION
– Research conducted over 10 years which was used to develop the next generation of touring systems, the Firenze Series, has also been applied to the new line of K-array speakers, the Concert Series.
– This groundwork led to significant advancements including the ability to digitally steer the sound, the use of an onboard touch screen and an intelligent integration of capabilities such as various stacking and hanging positions, weather resistance and integrated DSP multiple analog and digital inputs. And with the K-dante accessory, the system can be used in Dante network. The company’s signature compact design, Slim Array technology, is also implemented.
The KH2 is the smallest mid-hi line array element offered in the line. The self-powered speaker is comprised of two 8” neodymium magnet woofers each with a 2.5” voice coil and two 1.4” compression drivers with a 2.5” voice coil each.
However small in size, this compact speaker can really deliver a large sound, making it a perfect solution for medium scale events in stadiums, arenas, concert halls and theatres.
All components are designed by K-array and custom-made under K-array’s quality control system.
TECHNICAL SPECIFICATIONS
| ACOUSTICS | AMPLIFIER | ||
| Power handling | 750 + 250 W | Type | 1 modules class D – DSP controlled |
| Max power | 2000 W (1) | Nominal Power Output | 2 x 1000 W @ 8 Ω 1% THD + NOISE (5) |
| Frequency range (-10 dB) | 70 Hz – 19 kHz (2) | Protections | Over Temp. (Power Limiting – Thermal Shutdown),Short Circuit/Overload Output Protection, Power Limiting,Clip Limiter/Permanent Signal Limiter, High Frequency Protection |
| SPL 1W/1mt | 99 dB (3) | ||
| Maximum SPL | 130 dB (cont.) – 136 dB (peak) (4) | ||
| COVERAGE | AC POWER | ||
| Horizontal | 110° | Nominal power requirements | 100 – 240 Vac ± 10% 50-60 Hz |
| Vertical | 20° (preset dependent) | Operating Range | 85 – 265 Vac (auto-range) |
| CROSSOVER | CONSUMPTION | ||
| Type | Electronic | Power factor (cosφ) | >0.90 @ 4Ω full power |
| Frequency | 1200 Hz | 1/8 rated power (pink noise)@ 8Ω | 300 W |
| TRANSDUCERS | CERTIFICATION | ||
| Type | 2 X 8” Neodymium magnet woofer with2.5” voice coil 2 X 1.4” compression driver with 2.5” voice coil | IP | 20 (53 with K-AMPCOVER accessory) |
| AUDIO IN/OUT | PHYSICAL | ||
| Analog connectors | 2 male + 2 female 3-pin balanced XLR | Dimensions | 83.9 cm x 28.5 cm x 21.0 cm (33.0“ x 11.2” x 8.3“) |
| Digital connectors | 1 male + 1 female 3-pin balanced XLR | Weight | 29.0 kg (63.9 lbs) connecting hardware included |
| REMOTE CONTROL INPUT | |||
| Connectors | 1 male + 1 female XLR parallel1 USB B Jack serial converter | ||
|
Notes for data 1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed by EIAJ standard 2. With dedicated preset; 3. Measured @4 mt then scaled @1 mt; 4. Measured with musical signal 5. EIAJ Test Standard, 1KHz, 1%THD New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue. |
|||
