DIMIC12
 |
Selective programmable digital paging station for AC12.8 DIMIC12 is a selective progammable digital paging station with the possibility to communicate with different zones in your office. The DIMIC12 can be used for 12 different zones. When the DIMIC12 is used with AUDIOCONTROL12.8 you can allocate buttons to perform actions like opening a door, controlling a sound source, ring a bell or even start a series of commands.This paging station is designed for use with AUDIOCONTROL12.8 and easy to configure via the host’s graphical user interface. DIMIC12 combines an inconspicious and elegant design with a remarkable sound quality. It has speech-optimized sound processing and a unidirectional condenser microphone.The unit has universal configuration of push buttons, 12 free configurable selection buttons, status LEDs, a push-to-talk button and multicolor paging status LED. Expandable with maximum 7 x DIMIC12S. |
SPECIFICATIONS
| active | Yes | polar pattern | uni-directional |
| buttons | 12 programmable + Call + All Call | indicator | 1 per button + multi-color status |
| zones | up to 12 | frequency range | 220 Hz – 20 kHz |
| nominal output level | 775mV variable balanced | lo-cut | 220 Hz, 6 dB/oct |
| power type | Phantom or external power supply | external power supply | 12 – 24Vdc/75mA |
| mic stem lenght | 395 mm | connector | RJ45 |
| cable lenght | 5 m | cable type | CAT5 |
| cut out dimensions | 85 x 230 mm | width | 110 mm |
| height | 58 mm | depth | 240 mm |
| weight | 650 gr | supported main unit | AUDIOCONTROL12.8 |
| Net weight product (kg) | 0,68 |
MICPAT-2
 |
Selective 2-zone paging station The Apart MICPAT-2 is a sturdy table type paging microphone. It is ideal for use with CONCEPT1(T) and MA247(MR).It has a flexible gooseneck and a high quality unidirectional dynamic microphone capsule. With MICPAT-2 you can make paging calls to maximum two zones simultaneously (zone 1 individual, zone 2 individual or both zones). A clear LED indication for both the zones is integrated in the solid microphone base. The aluminium base is equipped with two push-to-talk switches. |
SPECIFICATIONS
| polar pattern | uni-directional | buttons | 2 push to-talk |
| indicator | 1 per button | zones | 2 |
| frequency range | 80 Hz – 12 kHz | nominal output level | 275 mV balanced |
| rated output impedance | 600 balanced ohms | mic stem lenght | 310 mm |
| connector | open wire | cable lenght | 5 m |
| cable type | 2 core + 2 core screened | width | 125 mm |
| height | 55 mm | depth | 175 mm |
| weight | 850 gr | Net weight product (kg) | 0,92 |
MICPAT-4
 |
Selective 4-zone paging station The Apart MICPAT-4 is a sturdy active multizone-paging microphone. It has a flexible gooseneck and a high-quality directional condensor microphone.With MICPAT-4 you can make paging calls to a maximum of four zones simultaneously. It has been designed specifically for use with the Apart ZONE4 pre-amplifier and future models. Multiple MICPAT-4 mics can be connected in parallel by using the optional RJ45SPLIT splitter. Operating this microphone is very straightforward: select the zones you want to page by pushing buttons 1 to 4. You can select all zones at once by pushing the ‘all’ button. The call button is momentary: push to talk. All the other buttons are latching. During paging the call LED will light orange, and all other microphones connected in parallel will be temporarily disabled (busy). In a multi-microphone setup, the MICPAT-4 will automatically detect if another microphone is already paging. This is indicated by an orange call LED. When paging has ended, the LED will return to green. MICPAT-4 and ZONE4 have an easy plug-and-play installation and comfortable, intuitive use. As all Apart products, they have been designed with installer ease in mind! |
SPECIFICATIONS
| active | Yes | polar pattern | directional, low feedback, electret capsule |
| buttons | 4 selection + Call + All Call | indicator | 1 per button + multi color status |
| zones | 4 | frequency range | 80 Hz – 20 kHz |
| nominal output level | 2 V balanced | rated output impedance | 50 balanced ohms |
| power type | Phantom | mic stem lenght | 275 mm |
| connector | RJ45 | cable lenght | 5 m |
| cable type | CAT5 | width | 115 mm |
| height | 60 mm | depth | 162 mm |
| weight | 550 gr | Net weight product (kg) | 0,70 |
MICPAT-6
 |
Selective 6-zone paging station MICPAT-6 is selective 6-zone paging microphone. It has been designed especially for use with the Apart MA247 100 Volt paging amplifier.It’s possible to connect multiple MICPAT-6’s in parallel by using an RJSPLIT. Separate microphone cables are also connected in parallel. Connection to the MA247 is done by a standard CAT5 cable and a separate balanced MIC cable. The maximum approved cable length is 100 meters. Please note that MICPAT-6 can not be linked to a PC and is not network compatible! When using more than one microphone, MICPAT-6 automatically detects if another microphone is already paging. This is indicated by an orange call LED. Once the paging is finished, the LED will return to green. To make a paging call, the user can select the zones by pushing buttons 1-6. The buttons will light red in order to indicate that paging for these respective zones is selected. It is possible to select all zones at once by pushing the ‘ALL’ button. The paging call goes out once the user pushes the ‘CALL’ button. The six zone buttons and the ‘ALL’ button are latching, so the user can permanently select the zones he needs most. The ‘CALL’ button is push-to-talk. Only by pushing this button, a paging call goes out to the selected zones. During paging, the call light will light orange and all other microphones connected in parallel will be temporarily disabled (busy). No more searching for the right accessory: MICPAT-6 is a plug-and-play microphone for the MA247. Apart offers the one stop shopping solution and takes unnecessary worries off an installers’ mind! |
SPECIFICATIONS
| active | Yes | polar pattern | directional, low feedback, electret capsule |
| buttons | 6 selection + Call + All Call | indicator | 1 per button + multi color status |
| zones | 6 | frequency range | 80 Hz – 20 kHz |
| nominal output level | 2 V balanced | rated output impedance | 50 balanced ohms |
| power type | Phantom | mic stem lenght | 275 mm |
| connector | open wire + RJ45 | cable lenght | 5 m |
| cable type | CAT5 + 2 core screened | width | 115 mm |
| height | 60 mm | depth | 162 mm |
| weight | 550 gr | Net weight product (kg) | 0,80 |
