FEATURES
• Unique performance-to-size ratio
• Fitted with integral handles and castors
• Direct radiating, long excursion 18” driver
• Analog and digital AES-EBU inputs
• RS485 and USB connectivity for remote control
DESCRIPTION
• The K-array KMT12 I is a powered 12” subwoofer, whit programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations. The amplifier mounted on board is class D, delivering 2 x 1000 W at 8Ω. The KMT12 I features an integrated touch screen, providing intuitive control over the main DSP functions: input/output levels, signal routing, offset delays for subwoofer and speakon output and overall system delay (up to 330 ms).
• All DSP functions, including EQ, can also be remote controlled via software over USB or RS485 (3-pin XLR). The KMT series provides two balanced analog line level inputs and a two-channel AES/EBU digital input. An integrated class D amplifier delivers 2 x 1000 W at 8Ω, with a max THD of 1% (EIAJ test @ 1kHz)
• The KMT12 I features multiple analog and digital outputs, including a Speakon output to connect a wide array of passive speakers including mid-high models (KK52, KK102) or additional passive subwoofers (KMT12P). To optimize performance, the on-board DSP includes up to 40 programmable presets. The unique four-corner port configuration provides symmetrical back loading to the speakers, for extended bass response with very low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight. Pocket handles and an M20 thread mount position for attaching mid-high speakers makes the subwoofer convenient to use and ideal for medium throw applications in theaters, concert halls, and Audio/ Video installations.
• All KMT components are designed by K-Array and custom made under K-array’s quality control system. All KMT components are designed by K-array and custommade under K-array’s quality control system.
TECHNICAL SPECIFICATIONS
| ACOUSTICS | |
| Speaker power handling | 700 W (AES) |
| Max Power | 1200 W |
| Impedance | 8 Ω |
| Frequency range | 40 Hz – 150 Hz ± 3dB (preset relating) |
| SPL 1W/1mt | 99 dB |
| Maximum SPL | 128 dB continuous – 134 dB peak |
| COVERAGE | |
| Horizontal | Omni |
| Vertical | Omni |
| CROSSOVER | |
| Type | DSP controlled |
| Frequency | 150 Hz (preset dependent) |
| TRANSDUCERS | |
| Full range | 1 x 12” Neodymium speakers with 3” voice coil |
| AUDIO INPUT | |
| Analog connectors | 2 male + 2 female 3-pin balanced XLR |
| Digital connectors | 1 male + 1 female 3-pin XLR |
| AUDIO POWERED OUTPUT | |
| Connector | Female Speakon |
| Wiring | Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C. |
| REMOTE CONTROL INPUT | |
| Connectors | 1 male + 1 female XLR parallel / 1 USB B Jack serial converter |
| POWER INPUT | |
| Connectors | 2 x PowerCon IN/OUT |
|
AMPLIFIER |
|
| Type | 1 modules class D – DSP controlled |
| Subwoofer Power Output | 1000 Watt 1 @ 8Ω |
| Speakon Power output | 1000 Watt 1 @ 8Ω |
| Protections | Dynamic limiter, over current, over temp, short circuits |
|
AC POWER |
|
| Nominal power requirements | 100 – 240 Vac ± 10% 50-60 Hz |
| Operating Range | 85 – 265 Vac (auto-range) |
|
CONSUMPTION |
|
| 1/8 rated power (pink noise)@ 4Ω | 300 W |
| PHYSICAL | |
| Dimensions | 32.6 cm x 32.7 cm x 43.3 cm (12.8“ x 12.9” x 17.0“) |
| Weight | 15.6 kg (34.4 lbs) |
Notes for data
1. Amplifier wattage rating is based on the maximum unclipped burst sine wave RMS voltage that the amplifier will produce into the nominal load impedance. New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
