FEATURES
• Selectable horizontal coverage
• Extended frequency response
• Strong stainless steel chassis
• Controlled horizontal dispersion
DESCRIPTION
• The KRM33P is an ultra-compact and low-profile passive wedge speaker with a controlled horizontal pattern and an extended frequency response. It is made up of three 3.15” cone drivers and one 6” passive radiator. This combination guarantees a controlled and linear emission on a really wide range, with a bass enhancement mode to go down to 70Hz.
• The controlled horizontal dispersion gives the possibility of creating horizontal arrays which increase the SPL and the coverage while maintaining a high and constant signal-before-feedback within all the cluster’s beams.
• The stainless steel chassis is a sturdy and durable box solution which is also remarkably short in height. Thanks to this feature the KRM33P can be easily and discreetly integrated in scenography designs, broadcast studios as well as underbalcony speakers in theaters.
• All the components of the KRM33P are designed by the K-array R&D department and made in Italy under the K-array quality control system.
TECHNICAL SPECIFICATIONS
| ACOUSTICS | |
| Speaker power handling | 180 W(AES) |
| Max power | 300 W (1) |
| Impedance | 8 Ω |
| Frequency range | 70 Hz – 20 KHz (2) |
| SPL 1W/1mt | 93 dB (3) |
| Maximum SPL | 115 dB (cont.) – 121 dB (peak) (4) |
| COVERAGE | |
| Type | 30° – 70° selectable |
| Frequency | 90° |
| CROSSOVER | |
| Type | External cross over required |
| Frequency | High pass @ 70Hz, 24dB/oct suggested minimum |
| TRANSDUCERS | |
| Full range | 3 X 3,15” Neodymiun cone driver with 1” voice coil
1 X 6” passive radiator |
| SELECTION SWITCH | |
| Horizontal pattern | Spot – Flood zithromax antibiotico |
| POWER AUDIO INPUT/OUTPUT | |
| Connectorsl | 2 x 4-pin speakon |
| Wiring | 1+ 1- (signal IN & LINK) 2+ 2- (Through) |
| RECOMMENDED AMPLIFIERS | |
| Type | KA10, KA10-10 |
| CERTIFICATION | |
| IP | 55 |
| PHYSICAL | |
| Dimensions | 26.6 x 10.3 x 30.2 cm (10.47” x 4.06” x 11.89”) |
| Weight | 4.4 Kg (9.5 lbs) |
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed by EIAJ standard;
2. With dedicated preset;w
3. Mesured @8 m, then scaled @1 m;
4. Mesured with musical signal; New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
