FEATURES
• Unique performance to size ratio
• high power 133 db continuos 139 db peak
• Direct radiating, long excursion 2 x 18” cone drivers
• Fitted with integral handles
DESCRIPTION
• The KMT218P is a high performance sub-bass system designed for use with medium-large wavefront systems, in both touring and install applications. It features two 18” drive units with magnet structure and suspension engineered for maximum linear excursion. The ultra-light reflex cabinet is fitted with pocket handles and one M20 thread mount position for attaching mid.high speakers. It features large area porting to reduce air noise. The KMT218P is designed to be powered by KA84 amplifier and KMT218 Speakon output and to be easily integrated with Kayman mid-high speakers. The KMT218P is ideal for medium-large throw applications, like theaters, clubs, concert halls, portable and permanent AV installations.
• All the KMT218P components are designed by K-array R&D department and custom made under K-array control quality system.
TECHNICAL SPECIFICATIONS
ACOUSTICS | |
Speaker power handling | 1600 W |
Max Power | 2800 W (1) |
Impedance | 4 Ω |
Frequency range | 30 Hz – 150 Hz |
SPL 1W/1mt | 101 dB |
Maximum SPL | 133 dB (cont.) – 139 dB (peak) |
COVERAGE | |
Horizontal | Omni |
Vertical | Omni |
CROSSOVER | |
Type | External crossover required |
Frequency | Low pass @ 150 Hz maximum |
TRANSDUCERS | |
Full range | 2 X 18” Neodymium magnet woofer with 3” voice coil |
POWER AUDIO IN/OUT | |
Connector | 2 x 4 pin Speakon |
Wiring | 1+ 1 -(signal IN & Link); 2+ 2- (through) |
RECOMMENEND AMPLIFIERS | |
Type | KA84, KMT218 |
PHYSICAL | |
Dimensions | KA84, KMT218 |
Weight | 46.0 kg (101.41 lbs) |
Notes for data
1. Amplifier wattage rating is based on the maximum unclipped burst sine wave RMS voltage that the amplifier will produce into the nominal load impedance. New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.